TRACOPOWER Isolated DC-DC Converter, Vin 43-160V dc, Vout 15V dc, I/O 2250V dc - TRACOPOWER
TRACOPOWER
TRACOPOWER Isolated DC-DC Converter, Vin 43 → 160 V dc, Vout 15V dc, I/O isolation 2250V dc
- BMUK Part # :-781-6969
- BrandTRACOPOWER
- Mfr. Part No.TEP 75-7213WI-CMF
-


Traco 75W Single Output Regulated Isolated DC-DC Converter - TEP-75WI Series
75W single output regulated isolated high-performance PCB mount dc-dc converter modules in a rugged, sealed metal case with four threaded M3 inserts for attachment of a heatsink (see 706-6420 for suitable heatsink). These single output regulated isolated high performance dc-dc converters have a high efficiency allowing an operating temperature up to +60°C with natural convection cooling without power derating, output voltage trimming and remote On/Off.
Ultra wide 4:1 input voltage range
Soft start
Full load operation up to 60°C with convection cooling
Remote On/Off
Output current limitation
Under voltage lockout
Reverse input voltage protection
Over temperature, over voltage, and short circuit protection
Note
MTBF to MIL-HDBK-217F (25°C) ,Derate above 60°C
For suitable common mode chokes:
TEP 75-24xx : see stock number 745-1228 (L1) and (L2)
TEP 75-48xx : see stock number 745-1212 (L1) and stock number 745-1225 (L2)
Standards
UL 60950-1, IEC 60950-1, EN 60950-1
Traco - 75W to 240W - TEP Series
| Output Voltage | 15V dc | |
| Input Voltage Range | 43 → 160 V dc | |
| Input Voltage Nominal | 72 V dc | |
| Isolation Voltage | 2250V dc | |
| Output Current | 5A | |
| Mounting Type | Through Hole | |
| Number of Outputs | 1 | |
| Efficiency | 91% | |
| Minimum Temperature | -40°C | |
| Maximum Temperature | +75°C | |
| Load Regulation | 0.1% | |
| Line Regulation | 0.1% | |
| Depth | 37.3mm | |
| Series | TEP 75WI | |
| Weight | 238g | |
| MTBF | 75000h | |
| Length | 85mm | |
| Ripple And Noise | 100mV Pk-Pk |





