Nano BASIC Arduino Shield Compatible Microcontroller PCB Stamp PIC Robotics UNO - BMUK

roll over the image to zoom in


£0.00
£29.99

BMUK-101 with Nano-28x
Earn0
reward points

In stock: 26

Sorry! We're out of stock


    Unit Quantity:
    1
    Unit Type:
    Unit


    BMUK

    Welcome to the Nano BASIC Arduino Board supplied with Nano-28X CPU

    dsc_7025.jpg

    This Board takes the Basic Micro Nano-28 or 28X Microcontroller IC(28X is Supplied) and lets you interface to the vast range of ready made Arduino Shield PCB's BUT do the programming in the BASIC programming language,
    nano28x.jpg

    The writing and debugging of the BASIC programs for the entire range of Basic Micro CPU's is done via Basic Micro Studio, this is FREE software you can download to your PC and it makes writing, testing and debugging BASIC programs very easy to do, once you have written a program BMS will check to see if there are any errors and if not you can download the code into the CPU of your target hardware using the Nano USB programming adapter(Not Supplied) and run it to see if it works and does what you expected, if it does not work then the Basic Micro Studio allows you to run the program a line at a time to check program flow and you can look at variables to see if the results are what you expect as you go line at a time into the program, you can also add DEBUG commands to the program so at specific points the program will send a message or value to the DEBUG window of BMS and that way you can check other hardware is working fine for example the raw values of an external sensor of some kind, once you are happy with the program it can be saved to the BMS as a BASIC file for editing and use later on and you can then download its digital version to the Target CPU in RUN mode, once you have done this you can disconnect the PC from the target and once power is applied the program in the CPU will automatically run without a PC connected,



    The BASIC programming language is very powerful and it makes it easy to write a program for almost any task, you can set the flow of the program with simple commands and the flow can be change based on a hardware status so for example you can tell the program to check a pin on the CPU and if its high go to one part of the program but if its low go to another or you can read a voltage input from an external sensor for example and turn on a LED if its too high, the BASIC command set also contains special commands for example to drive an LCD display or to send out a PWM signal to a servo unit, you can measure 0-5 Volt signals using the built in ADC or the length of an external pulse from a remote control transmitter for example when building robots, there are a vast number of sensors you can interface to the Basic Micro range of Micro Controllers, once you get in your values from the outside world you can also work with maths commands to do basic addition and subtraction etc on integer or whole Numbers BUT the BASIC commands will also allow you to work in floating point numbers as well so you can do trigonometry for example sine and cosine, tangents etc, all these functions make it easy to use the Basic Micro range for a whole host of tasks such as educational use, robotics, radio control, model engineers, electronics projects and many many more applications,

    If you get stuck then there is a technical forum where you can post questions on hardware and software and other members can assist you with your task, this all makes it very easy to get up and running with the Basic Micro range of Micro Controllers,

    You can download the BASIC programming manual here :- Basic Programming Manual Download

    The Nano Basic Arduino PCB an Arduino Shield compatible board with several unique features to facilitate its use in robotics,

    nano-basic-arduino-web.jpg

    • 100% Arduino Shield Compatible
    • 2.1mm DC Power Input Jack with reverse polarity protection
    • Screw Terminal Connection for DC Power Input
    • Side Mount RESET button
    • Low Drop-Out Regulators for +5V and 3.3V at up to 300mA Each Rail
    • Input Voltage Range 7-12 Volts 
    • Easy Mount Form Factor, Overall PCB size 76mm x 58.5mm
    • Low Profile Components do not foul Arduino shields
    • Accepts standard Nano-28 at Over 13,200 BASIC Instructions per Second
    • Built in 20mHz Resonator to also take the Nano-28X running at Over 33,000 BASIC Instructions per Second
    • Programming Header for the standard NANO USB Programming Adapter(Not Supplied)
    • Silk Screen shown Arduino Pins and Nano-28 Port Pins for easy Programming
    • Power on LED(Red)
    • User LED(Green) on spare Nano Port P20
    • Comes with the Nano-28X Chip that runs at 33,000 Basic Instructions per second !
    • High Speed Programming using the Nano USB Programming Adapter(Not Supplied)

    Useful Downloads :-

    Please see our other items for a version of this PCB that also comes with the Nano USB Programming adapter if you require one,

    If you have any technical questions about this product please call Basic Micro UK on 01623 720730