Analog Devices ADP5062CP-EVALZ Battery Charger for ADP5062 Evaluation Board

• BMUK Part # :-794-6758
• BrandAnalog Devices
• Mfr Part No.ADP5062CP-EVALZ
•  
•  
•  
• You will get 1 Board

Evaluation Board for ADP5062 Linear Li-Ion Battery Charger with Power Path and USB

The ADP5062 charger evaluation system is composed of an evaluation board and a USB-to-serial-I/O interface (USB-SDP-
CABLEZ). All evaluation board functions and circuits are controlled via one IC bus connector. The IC bus interfaces
with the ADP5062 directly, and the digital input/output signals are controlled through an on-board input/output expander circuit on the IC bus.
The evaluation board also features a 3.4V regulator for VDDIO generation. The board contains jumpers and numerous test points for easy evaluation.
The ADP5062CP-EVALZ evaluation kit contains a CD with the ADP5062 Graphical User Interface (GUI) 3.0 installer. Use the GUI in conjunction with the USB-SDP-CABLEZ USB-to-serial-I/O interface.
The ADP5062 charger IC is fully compliant with USB 3.0 and the USB Battery Charging Specification 1.2 and enables charging via the mini USB VBUS pin from a wall charger, car charger, or USB host port.
The ADP5062 operates from a 4V to 6.7V input voltage range but is tolerant of voltages up to 20V, thereby alleviating concerns about USB bus spikes during disconnect or connect scenarios.
The ADP5062 features an internal FET between the linear charger output and the battery. This permits battery isolation and, hence, system powering under a dead battery or no battery scenario, which allows for immediate system function on connection to a USB power supply.

Battery Charging & Monitoring, Analog Devices